SSC-JE(Mechanical Engineering)

SSC-JE Online Coaching | Mechanical Engineering

Mechanical Engineering Branch is the Evergreen in all Engineering Branch. Mechanical Engineering Branch plays a major role in the Development in Nation, because all machinery part is associated with Mechanical Engineering.

Mechanical Engineering branch has a huge syllabus as compared to other Engineering branches but the syllabus is easy and simple which is easily understood by the students, so that number of students are preferring this branch.

One of the major reasons, the Mechanical Engineering branch is preferring by the students because of a huge number of vacancies in both Govt. sector as well as the Private sector. Most of the students have priority to select the Govt. Sector Either in Central or State.

Mechanical Engg. Vacancies in Different Sector

1.Central Govt.

SSC-JE Recruitment every year a huge no. of vacancy for Mechanical engineers either Diploma holders or B. Tech Holders.

For the Mechanical Engineering students SSC-JE is opportunity and SSC-JE having Different Department Like CPWD, MES, CWC, Farakka Barrage etc.

2. STATE-JE.

3.PSU’S:

BHEL, NTPC, NHPC, GAIL, IOCAL, ONGC, PGCIL, NHAI, IRCON etc

4.Department:

DDA, DSSSB, State-PWD, State-MWRD, State Electricity board.

5.Defence:

ISRO, DRDO, BARC, NPCIL, etc

Exam Pattern of SSC-JE

PaperModePaper PatternTimeTotal Marks
Paper-ICBT(Computer Based Test) 1.Reasoning- 50 Question
2. General Awareness- 50 Question
3.Technical- 100 Question
2 Hours200
Paper-IIPen and Paper Type Conventional2 Hours300

Note: 0.25 Negative marking in Paper-I there is no negative marking in Paper-II

How to Prepare SSC-JE Mechanical Engineering ?

In every recruitment either central and state departments, which select the students by conducting one or two-stage examination either online or offline.

The mechanical Engineering branch has a lots number of papers in the Technical segment.

The examination conducting body asking the paper both Technical and Non-Technical.

Before the starting preparation firstly analyze which paper is more significant for examination.

Modulation Team analyzes such paper either Technical or Non-Technical segment which is more significant.

Technical

1. SOM 2. TOM 3. Thermodynamics 4. Fluid Mechanics and Machinery 5. I C Engine 6. Engineering Mechanics 7. RAC 8. Production Technology

Non-Technical:

1.Indian Polity 2. Modern History 3. Life Science 4. Economics 5. Reasoning
Students Must need to practice the previous year paper, Practice objective and Conventional from Modulation Institute Publication Book and Practice set.

How Modulation Institute Help You?

Modulation is India’s Leading Institute for Online SSC-JE Mechanical Engineering classes. In Online SSC-JE Mechanical Engineering Course Modulation provide Full Course Video Lecture, Study Material, Practice Set and Online Test Series of Mechanical Engineering

In the Recorded video Lecture course, all the topic covered of respective subject of SSC-JE Mechanical Engineering Syllabus.

Modulation team prepare the video lecture on the concern of student so that every student easily understand each and every concept so that students can easily prepare for SSC-JE Mechanical Engineering from Home.

This Video lecture having both concept to clear SSC-JE Mechanical Engineering objective Paper and as well as SSC-JE Mechanical Engineering conventional Paper and also SSC-JE Mechanical Engineering Interview round in Mechanical Engineering.

Modulation team regularly connected with the student and try to solve the problem which the student is facing. and in our course we provide Full SSC-JE Mechanical Engineering Solved previous years Question Bank in Video Format and pdf format both so that all Mechanical Engineering question concept will be clear and students can qualify all Mechanical Engineering JE level Exam like SSCJE. State-JE, DMRC, PWD, CPWD, RRB-JE, etc.

Modulation Institute has a very experienced faculty of respective subject and also guide to How to prepare for SSC-JE Mechanical Engineering in Online Mode

Modulation has one Research and Development team which design some innovative question and mock test which is very helpful for the Mechanical Engineering students.

Modulation Institute provides sufficient content SSC JE Mechanical Engineering all Govt. Job Entrance Exam (Video Lecture, Study Material, Question Bank, and Practice set) to the students so that students have no need for any other guide and they can study online at their own place.

Our Faculty Team in Mechanical Department





Modulation Covered SSC JE Mechanical Engg. all topic in video lecture

Technical Subject

Sr.NoSubjectTopic CoveredTotal Hours.Faculty Name
1Engineering Mechanics Force (resolution of force, moment of force, force system, composition of forces),
Equilibrium, Friction, Centroid and Centre of gravity, Simple machines..
50 hr. Anurag Sir
2Theory of Machine Concept of simple mechanism, Four bar linkage and it's mechanism,
Gear, gear profile and gear ratio, Flywheel, Governor, Balancing, Clutch,
Friction, Cam, Vibration.
50 HoursAnurag Sir
3Strength of Material Principles of surveying, measurement of distance, chain surveying,
working of prismatic compass, compass traversing, bearings, local
attraction, plane table surveying, theodolite traversing, adjustment
of theodolite, Levelling, Definition of terms used in levelling, contouring,
curvature and refraction corrections, temporary and permanent adjustments
of dumpy level, methods of contouring, uses of contour map, tachometric
survey, curve setting, earth work calculation, advanced surveying equipment. <
50 HoursAnurag Sir
4Thermodynamics 1st Laws of thermo dynamics, conversion of heat into work vice versa,
laws of perfect gases, thermo dynamic processes – isochoric, isobaric,
isothermal hyperbolic, isentropic, polytrophic and throttling, 2nd Law of
Thermodynamics, Entropy, Available Energy, Pure Substance,
Thermodynamic Relations, Kinetic Theory of Gases
50 HoursAnurag Sir
5Hydraulics Hydraulics Turbine (Pelton wheel, Reaction,Francis,Kaplan and Propeller Turbine)
Hydraulics Pump (Centrifugal and Reciprocating Pump)
50 HoursAnurag Sir
6Refrigeration & Air ConditioningIntroduction or Ideal Refrigeration System, VCRS, Air Refrigeration
System, VARS, Air Conditioning, Refrigerant, Refrigeration equipment
50 HoursAnurag Sir
7I C Engine Introduction, Air Standard Cycles (Carnot Cycles, Otto Cycles, Diesel cycles),
Construction & Working Of Internal Combustion Engine (ICE), Comparison
Of Diesel & Petrol Engine, System Of ICE, Performance Of ICE.
50 HoursAnurag Sir
8Heat and Mass Transfer Introduction, Conduction mode of HT (Steady state HT, Unsteady state HT),
Extended Surfaces (Fins), Heat exchangers, Radiation mode of HT,
Convection mode of HT (Free Convection and Forced Convection).
50 HoursAnurag Sir
9Structural Engineering 50 HoursAnurag Sir
10Fluid Mechanics Properties of Fluid & Its Classification, Pressure & It’s Measuring Instruments,
Hydrostatic Forces, Buoyancy & Floatation, Fluid Kinematics, Fluid Dynamics
& It’s Application, Notch & Weir, Flow Through Pipe, Losses in Pipe, Model and
Dimensional Analysis, Boundary Layer Theory
50 HoursAnurag Sir
11Metrology Linear measurement – Slip gauges and dial indicators, angle measurements,
bevel protractor, sine bar, angle slip gauges, comparators (a) mechanical
(b) electrical (c) optical (d) pneumatic. Measurement of surface roughness;
methods of measurements by comparison, tracer instruments, collimators,
measuring microscope, interferometer, inspection of machine parts using the
concepts of shadow projection and profile projection.
50 HoursAnurag Sir
12Production Technology Welding : Welding – Introduction, classification of welding processes,
principles of arc welding, arc welding equipment, choice of electrodes
for different metals, principle of gas (oxy-acetylene) welding, equipment
of gas welding, welding procedures (arc & gas), soldering and brazing
techniques, types and applications of solders and fluxes, various flame
cutting processes, advantages and limitations of flame cutting, defects
in welding, testing and inspection modern welding methods, (submerged, CO2, atomic – hydrogen, ultrasonic welding), brief description of MIG &
TIG welding Grinding & Finishing Process : Principles of metal removal
by grinding, abrasives, natural and artificial, bonds and binding processes,
vitrified, silicate, shellac rubber, grinding machines, classification: cylindrical,
surface, tool & cutter grinding machine, construction details, relative merits,
principles of centreless grinding,
50 HoursAnurag Sir

Non-Technical

Sr.NoSubjectTopic CoveredTotal Hours.Faculty Name
1History Modern History 20 HoursGajendra Sir
2Indian Polity 30 HoursMam
3Economics 10 HoursSir
4General Science 30 HoursSajid ali Sir
5Reasoning 25 Hours Sir

Fee Structure

SSC-JE Full Course

In this course we provide Video Lecture + Study Material +Online Test Series

Sr.NoCourseDownloadable Course (fee)Pen Drive Course Fee
1Full Course (Only Technical) 7500/ Book Now 10,500/
2Full Course(Only Non-Technical) 3500/ 5000/
5Full Course( Tech + Non-Tech) 10,000 13,000

SSC-JE Subject Wise Course

In this course You can join for Single or Multiple subject what you want.

Sr.NoSubjectDownloadable Course Fee Pen Drive Course Fee
1Engineering Mechanics 1500 2000
2Theory of Machine 1500 2000
3Strength of Material 1500 2000
4Thermodynamics 1500 2000
5Hydraulics 1500 2000
6Refrigeration & Air Conditioning 1500 2000
7I C Engine 1500 2000
8Heat and Mass Transfer 1500 2000
9Fluid Mechanics 1500 2000
10Metrology 1500 2000
11Production Technology 1500 2000
12Material Science 1500 2000

SSC-JE Mechanical Engineering Demo Lecture