SSC JE Coaching | Civil Engineering
Modulation Provides Best SSC-JE Coaching for Civil Engineering in Delhi. In Modulation Institute all the Faculty are Highly qualified and very experienced. Modulation has very high-quality study material and SSC-JE Civil Engineering solved question paper. If you want to join Coaching classes for SSC-JE, you have the right choice is Modulation SSC-JE Coaching Classes GTB Nagar, Delhi.
Civil Engineering is the Core branch among all Engineering branch. Civil Engineering Branch plays an important role in the development of the Nation because construction is a major part of the nation. Most of constructional part such as roadways, railways, the building is associated with Civil Engineering.
Civil Engineering branch has a huge syllabus as compared to other branches Like Mechanical, Electrical, but the syllabus is easy and simple which is easily understood by the students, so that number of students are preferring the Civil Engineering branch.
One of the major reasons the Civil Engineering branch is preferring by the students because of the huge number of vacancies in both Govt. sector as well as the Private sector.
Most of the students have priority to select the Govt. Sector Either in Central or State.
Civil Engineering Vacancies in Different Sector
SSC-JE Recruitment every year a huge number of vacancies for Civil engineers either Diploma or B. Tech Holders.
For the Civil Engineering students SSC-JE is the big opportunity. SSC-JE has Different Department Like CPWD, MES, CWC, etc.
3.PSU’S:BHEL, NTPC, NHPC, GAIL, IOCAL, ONGC, PGCIL, NHAI, IRCON, etc
4.Department:DDA, DSSSB, State-PWD, State-MWRD, State Electricity board.
5.Defence:ISRO, DRDO, BARC, NPCIL, etc
Exam Pattern of SSC-JE
|Paper||Mode||Paper Pattern||Time||Total Marks|
|Paper-I>||CBT(Computer Based Test)||1.Reasoning- 50 Question2. General Awareness- 50 Question 3.Technical- 100 Question||2 Hours||200|
|Paper-II>||Pen and Paper Type||Conventional||2 Hours||300|
Note: 0.25 Negative marking in Paper-I there is no negative marking in Paper-II
How to Prepare for SSC-JE Civil Engineering ?
In every recruitment either central and state Department, select the students by conducting one or two-stage examination either online or offline. The civil Engineering branch has a lots number of papers in the Technical segment.
The examination conducting body asking the paper both Technical and Non-Technical.
Before the starting preparation firstly analyze which paper is more significant for examination.
Modulation Team analyzes such paper either Technical or Non-Technical segment which is more significant.
Technical1.SOM 2. Structure 3. BMC 4. SOIL 5. Environmental 6. Estimating and Casting 7. Fluid Mechanics.
Non-Technical:1.Indian Polity 2. Modern History 3. Life Science 4. Economics 5. Reasoning Students Must need to practice the previous year paper, Practice objective and Conventional from Modulation Institute Publication Book and Practice set.
How Modulation Institute Help You?
Modulation is India’s Leading institute for SSC-JE in Delhi. In SSC-JE Coaching for Civil Engineering Course Modulation provide Full Course class Lecture, Study Material, Practice Set and Online Test Series for Civil Engineering
Modulation institute has also the Recorded video Lecture course, all the topic covered of respective subject as per syllabus of SSC-JE
In Delhi, Coaching Institute for SSC-JE Civil Engineering is only Modulation Institute .
This Video lecture having both type of concept, SSC-JE objectiveExam and as well as SSC-JE conventional Exam of civil engineering
In India Modulation Institute is only institute those provide online SSC-JE Civil Engineering Coaching full course.
Modulation Institute also provide SSC-JE Civil Engineering Solved previous year question paper solution in video lecture so that Civil Engineering students can easily practice good quality question at home
Modulation team regularly connected with student and try to solve the problem which student is facing.
Modulation Institute have a very experienced faculty of respective subject and in video Lecture also say the tips of " how to qualify SSC-JE Civil " through Online SSC-JE Civil Engineering classes.
Modulation have one Research and Development team which design some innovative question and mock test which is very helpful for the students.
Modulation Institute provide the sufficient content for prepration of Civil Engineering Govt. Job Entrance exam (Video Lecture, Study Material, Question Bank and Practice set).
Our Faculty Team in Civil Department
Modulation Covered all topic of Civil Engg. in video lecture
|Sr.No||Subject||Topic Covered||Total Hours.||Faculty Name|
|1>||Building Materials||Physical and Chemical properties, classification, standard tests, uses and manufacture/quarrying of materials e.g. building stones, silicate-based materials, cement (Portland), asbestos products, timber and wood-based products, laminates, bituminous materials, paints, varnishes.||50 hr.||Anurag Sir|
|2>||Estimating, Costing and Valuation||estimate, a glossary of technical terms, analysis of rates, methods, and unit of measurement, Items of work – earthwork, Brick work (Modular & Traditional bricks), RCC work, Shuttering, Timber work, Painting, Flooring, Plastering. Boundary wall, Brick building, Water Tank, Septic tank, Bar bending schedule, Centre line method, Mid-section formula, Trapezoidal formula, Simpson’s rule. Cost estimate of Septic tank, flexible pavements, Tube well, isolates and combined footings, Steel Truss, Piles and pile-caps. Valuation – Value and cost, scrap value, salvage value, assessed value, sinking fund, depreciation and obsolescence, methods of valuation||50 Hours||Anurag Sir|
|3>||Surveying||Principles of surveying, measurement of distance, chain surveying, working of prismatic compass, compass traversing, bearings, local attraction, plane table surveying, theodolite traversing, adjustment of theodolite, Levelling, Definition of terms used in levelling, contouring, curvature and refraction corrections, temporary and permanent adjustments of dumpy level, methods of contouring, uses of contour map, tachometric survey, curve setting, earth work calculation, advanced surveying equipment. <||50 Hours||Anurag Sir|
|4>||Soil Mechanics||Origin of soil, phase diagram, Definitions-void ratio, porosity, degree of saturation, water content, specific gravity of soil grains, unit weights, density index and interrelationship of different parameters, Grain size distribution curves and their uses. Index properties of soils, Atterberg’s limits, ISI soil classification and plasticity chart. Permeability of soil, coefficient of permeability, determination of coefficient of permeability, Unconfined and confined aquifers, effective stress, quicksand, consolidation of soils, Principles of consolidation, degree of consolidation, pre-consolidation pressure, normally consolidated soil, e-log p curve, computation of ultimate settlement. Shear strength of soils, direct shear test, Vane shear test, Triaxial test. Soil compaction, Laboratory compaction test, Maximum dry density and optimum moisture content, earth pressure theories, active and passive earth pressures, Bearing capacity of soils, plate load test, standard penetration test.||50 Hours||Anurag Sir|
|5>||Fluid Mechanics and Hydraulics||Fluid properties, hydrostatics, measurements of flow, Bernoulli’s theorem and its application, flow through pipes, flow in open channels, weirs, flumes, spillways, pumps and turbines.||50 Hours||Anurag Sir|
|6>||Irrigation Engineering||Definition, necessity, benefits, 2II effects of irrigation, types and methods of irrigation, Hydrology – Measurement of rainfall, run off coefficient, rain gauge, losses from precipitation – evaporation, infiltration, etc. Water requirement of crops, duty, delta and base period, Kharif and Rabi Crops, Command area, Time factor, Crop ratio, Overlap allowance, Irrigation efficiencies. Different type of canals, types of canal irrigation, loss of water in canals. Canal lining – types and advantages. Shallow and deep to wells, yield from a well. Weir and barrage, Failure of weirs and permeable foundation, Slit and Scour, Kennedy’s theory of critical velocity. Lacey’s theory of uniform flow. Definition of flood, causes and effects, methods of flood control, water logging, preventive measure. Land reclamation, Characteristics of affecting fertility of soils, purposes, methods, description of land and reclamation processes. Major irrigation projects in India.||50 Hours||Anurag Sir|
|7>||Transportation Engineering||Highway Engineering – cross sectional elements, geometric design, types of pavements, pavement materials – aggregates and bitumen, different tests, Design of flexible and rigid pavements – Water Bound Macadam (WBM) and Wet Mix Macadam (WMM), Gravel Road, Bituminous construction, Rigid pavement joint, pavement maintenance, Highway drainage, Railway Engineering- Components of permanent way – sleepers, ballast, fixtures and fastening, track geometry, points and crossings, track junction, stations and yards. Traffic Engineering – Different traffic survey, speed-flow-density and their interrelationships, intersections and interchanges, traffic signals, traffic operation, traffic signs and markings, road safety.||50 Hours||Anurag Sir|
|8>||Environmental Engineering||Quality of water, source of water supply, purification of water, distribution of water, need of sanitation, sewerage systems, circular sewer, oval sewer, sewer appurtenances, sewage treatments. Surface water drainage. Solid waste management – types, effects, engineered management system. Air pollution – pollutants, causes, effects, control. Noise pollution – cause, health effects, control.||50 Hours||Anurag Sir|
|9>||Structural Engineering||50 Hours||Anurag Sir|
|10>||Theory of structures||Elasticity constants, types of beams – determinate and indeterminate, bending moment and shear force diagrams of simply supported, cantilever and over hanging beams. Moment of area and moment of inertia for rectangular & circular sections, bending moment and shear stress for tee, channel and compound sections, chimneys, dams and retaining walls, eccentric loads, slope deflection of simply supported and cantilever beams, critical load and columns, Torsion of circular section.||50 Hours||Anurag Sir|
|11>||Concrete Technology||Properties, Advantages and uses of concrete, cement aggregates, importance of water quality, water cement ratio, workability, mix design, storage, batching, mixing, placement, compaction, finishing and curing of concrete, quality control of concrete, hot weather and cold weather concreting, repair and maintenance of concrete structures||50 Hours||Anurag Sir|
|12>||RCC Design||RCC beams-flexural strength, shear strength, bond strength, design of singly reinforced and double reinforced beams, cantilever beams. T-beams, lintels. One way and two-way slabs, isolated footings. Reinforced brick works, columns, staircases, retaining wall, water tanks (RCC design questions may be based on both Limit State and Working Stress methods).||50 Hours||Anurag Sir|
|13>||Steel Design||Steel design and construction of steel columns, beams roof trusses plate girders||50 Hours||Anurag Sir|
|Sr.No||Subject||Topic Covered||Total Hours.||Faculty Name|
|1>||History||Modern History||20 Hours||Gajendra Sir|
|2>||Indian Polity||30 Hours||Mam|
|4>||General Science||30 Hours||Sajid ali Sir|
SSC-JE Full Course
In this course we provide Video Lecture + Study Material +Online Test Series
|Sr.No||Course||Downloadable Course (fee)||Pen Drive Course Fee|
|1>||Full Course (Only Technical)||7500/ Book Now||10,500/|
|2>||Full Course(Only Non-Technical)||3500/||5000/|
|5>||Full Course( Tech + Non-Tech)||10,000||13,000|
SSC-JE Subject Wise Course
In this course You can join for Single or Multiple subject what you want.
|Sr.No||Subject||Downloadable Course Fee||Pen Drive Course Fee|
|2>||Estimating, Costing and Valuation||1500||2000|
|10>||Theory of structures||1500||2000|